These Product Tours are just a structured sequence of web pages. Click the ► button to step through them.
The navigation buttons have the following functions:
|◄ takes you back to the beginning of the current tour
◄ is the same as your browser back button
▲ takes you up a level in the hierarchy
► steps forward to the next page
The drop-lists give another way of accessing the same pages
shows and hides a map of the structure of the tour with links to each page.
expands the tour into its own window (only visible when embedded in another page.)
EL-R/EX-R Series Tour Map
EX-R Series DC Supplies: DC Output Switches, Safety Binding Post Terminals
DC output switches
Each main output has a DC on-off switch. This
enables voltage and current settings to be viewed before the load is
connected and allows multiple outputs to be controlled individually.
Surprisingly, many power supplies omit this
essential feature.
Safety binding-post terminals
EX-R series power supplies are fitted with the new
TTi designed output terminals. These can accept a 4mm safety plug with
rigid insulating sleeve, a requirement specified by an increasing number
of laboratories for safety reasons. However, unlike
the 4mm safety sockets used on some other products, the new TTi
terminals can also accept fork connectors or bare wires, giving maximum
connection flexibility.
Simplicity in use
EX-R series power supplies use classic analogue
controls for voltage and current.
The large and bright displays have a fixed
resolution to avoid confusion. Preset voltage and current levels are shown when the DC output switch is
turned off. Remote sense is available when needed but is disabled by setting the
switch to Local.
expands the tour into its own window (only visible when embedded in another page.)
Each main output has a DC on-off switch. This
enables voltage and current settings to be viewed before the load is
connected and allows multiple outputs to be controlled individually.
Surprisingly, many power supplies omit this
essential feature.
EX-R series power supplies are fitted with the new
TTi designed output terminals. These can accept a 4mm safety plug with
rigid insulating sleeve, a requirement specified by an increasing number
of laboratories for safety reasons. However, unlike
the 4mm safety sockets used on some other products, the new TTi
terminals can also accept fork connectors or bare wires, giving maximum
connection flexibility.
EX-R series power supplies use classic analogue
controls for voltage and current.
The large and bright displays have a fixed
resolution to avoid confusion. Preset voltage and current levels are shown when the DC output switch is
turned off. Remote sense is available when needed but is disabled by setting the
switch to Local.